Reini-Repe is an easy-to-use, affordable and quick solution for seed treatment. Repe has been designed for seed treatment done with the filler spiral of a seeder. Repe has the same operating principle as Reini-Nepe. The pump doses the seed dressing, which is mixed with the filler auger into the grain when the seeder is filled.

Repe has been designed so that is can easily be installed at the back of the seed grain carriage. The seed treatment device’s housing can accommodate two 10 l canisters. It is easy to install for any filler auger. For those shown in the image, the nozzle is installed in the filler auger and power supply is arranged for the seed treatment device. The pump runs on 12 V direct current.

It is easy to adjust the Reini-Repe liquid seed treatment device with our Liquid treatment calculator.

  • Runs on 12V mains power, does not use pressurised air!

  • Easy to install for different filler augers.

  • Comes with four nozzle options, adjustment range 0.2–1 l/min.

  • Even seed treatment flow with the piston diaphragm pump.

  • Precise seed treatment spreading with flat spray nozzle.

  • Efficient seed treatment mixture with the grain with the auger.

  • Adjusting the seed treatment amount is easy with our new calculator!

reini repe 2 reini repe 3

Liquid seed treatment calculator (opens in a separate window)

At this moment, the Nepe calculator has the following seed dressings:

Is the treatment agent you use or market not included?Contact us!


Instructions for adjusting the seed dressing amount:

  • If you do not know the throughput of your auger, determine that first (kg/min). This can be done by filling a bag with grain for one minute and then weighing the bag.

  • Select the seed dressing and determine the dosing of the agent (ml/kg or l/t).

  • Calculate the dosage for the throughput of your auger.

  • Open the NEPE calculator

  • Select the seed dressing you use. If it is not on the list, contact us.

  • Enter the desired amount of the agent in the format ml/min.

  • Click Calculate Adjustment values.

  • The program gives you the adjustment values for the seed treatment device (the nozzle and pressure to use).


The throughput of the auger is 30 t/h / 60 min = 500 kg/min.You are using Fungazil, dosage 200 ml/100 kg of seed.The required agent dosage per minute is 500 kg/min x 200 ml/100 kg = 1,000 ml/min.With this information, the NEPE calculator will tell you that you will attain a throughput of 1,000 ml/min with nozzle #16 and a pressure of 2.84 bar.

Mäki-Reini Oy
Pohjankyröntie 95,
Phone + 358 400 605717